“电动轮椅控制器 英国PG控制器 VSI”参数说明
是否可折叠: | 电动轮椅控制器 | 电压: | 24V |
认证: | 电动轮椅控制器 | 附件: | 电动轮椅控制器 |
载重: | >200千克 | 爬坡度: | 15度 |
型号: | PG VSI | 规格: | 50A |
商标: | PG | 包装: | 纸盒 |
“电动轮椅控制器 英国PG控制器 VSI”详细介绍
Service Reminder and Advanced Programming
General Specifications
Operating Voltage 16-35V
Drive Current 50A
Overvoltage Trip 35V
Undervoltage Trip 13.5V
Reverse Battery Protection 40V
Operating Temperature-25°C to 50°C
Storage Temperature-40°C to 65°C
Brake Current 1A max.per brake
Battery Charging Current 12A RMS max.
Charger Connector Use Neutrik NC3MX
Moisture Resistance IPX4
Safety Multiple hardware and software
strategy
Designed to ISO7176:2008.
EMC on Sample Powerchair
Susceptibility Tested at 30V/m to EN12184 and
ANSI/RESNA requirements
Emissions To EN55022 class B
ESD IEC801
For further details refer to the newVSI technical manual SK80151
电气规格
电源电压:直流 24V
操作电压:直流 16V 到直流 28V
高峰电压:直流 38V
反向电池电流:直流-40V
PWM 频率:19.5kHz±1%
刹车电压:直流 12V 或 24V
刹车电流:最小 100mA 最大1A
电池充电电流:最大 12Arms
充电器接头:仅使用 Neutrik NC3MX
致动电机电流:最大 10A
最大驱动电流:
VSI 50 50A
VSI 50(70)50A(5秒 70A 升压)
VSI 70 70A
灯光模块
方向灯输出1.75A
方向灯输出3.5A
General Specifications
Operating Voltage 16-35V
Drive Current 50A
Overvoltage Trip 35V
Undervoltage Trip 13.5V
Reverse Battery Protection 40V
Operating Temperature-25°C to 50°C
Storage Temperature-40°C to 65°C
Brake Current 1A max.per brake
Battery Charging Current 12A RMS max.
Charger Connector Use Neutrik NC3MX
Moisture Resistance IPX4
Safety Multiple hardware and software
strategy
Designed to ISO7176:2008.
EMC on Sample Powerchair
Susceptibility Tested at 30V/m to EN12184 and
ANSI/RESNA requirements
Emissions To EN55022 class B
ESD IEC801
For further details refer to the newVSI technical manual SK80151
电气规格
电源电压:直流 24V
操作电压:直流 16V 到直流 28V
高峰电压:直流 38V
反向电池电流:直流-40V
PWM 频率:19.5kHz±1%
刹车电压:直流 12V 或 24V
刹车电流:最小 100mA 最大1A
电池充电电流:最大 12Arms
充电器接头:仅使用 Neutrik NC3MX
致动电机电流:最大 10A
最大驱动电流:
VSI 50 50A
VSI 50(70)50A(5秒 70A 升压)
VSI 70 70A
灯光模块
方向灯输出1.75A
方向灯输出3.5A