通过认证
“派克固美丽导热凝胶8010”参数说明
| 是否有现货： | 是 | 认证： | UL |
| 加工定制： | 是 | 材质： | 凝胶 |
| 用途： | 导热 | 型号： | 8010 |
| 规格： | 300CC/支 | 商标： | 固美丽Chomeirics |
| 包装： | 针筒式 | 热膨胀系数，ppm/K： | 150 |
| 表观导热系数，W/m-k： | 3.0 | 比重： | 2.7 |
| 操作温度范围，℃（°F）： | -55 - +200(-67 - +392) | 产量： | 10000 |
“派克固美丽导热凝胶8010”详细介绍
THERM-A-GAP GELs are supplied as pre-cured, single component compounds that can be dispensed over the heat generating component.
These unique gel materials result in much lower mechanical stress on delicate components than even the softest gap-filling pads. They are ideal for filling variable gaps between multiple components and a common heat sink.
Thermal gels are silicone-based formulations that are loaded with conductive fillers and are crosslinked to form a low-modulus paste. They are highly conformable and provide low thermal impedance like greases but are designed to overcome the pump-out and dryout issues of grease.
Dispensed Gels in Automotive Electronic Control Unit
(ECU) Application
固美丽导热脂（Thermal Grease）8010
物理特性 颜色 白色
操作温度范围，℃（°F） -55 - +200(-67 - +392)
比重 2.70
导热性能 表观导热系数，W/m-k 3.0
热容，J/g-K 1
热膨胀系数，ppm/K 150
电气性能 体积阻抗， ohm-cm 1014
法规 易燃性等级 V-0
RoHS兼容 是
渗气，%TML 1.33
储存寿命，自装运之日起的储存月数 18
√在炽热部件和散热片或外壳之间采用硅基材料导热
√在电子组件和散热片实际应用中能以多种界面公差进行填充
√可涂布式高配合性材料无需固化过程、混合或冷却
√具有良好的热稳定性，实际上在常规组装按压下无需压力即可变形
√支持需要最低胶层厚度和高导热性材料的高能应用
√是需要返修和野外维修场合的理想选择
These unique gel materials result in much lower mechanical stress on delicate components than even the softest gap-filling pads. They are ideal for filling variable gaps between multiple components and a common heat sink.
Thermal gels are silicone-based formulations that are loaded with conductive fillers and are crosslinked to form a low-modulus paste. They are highly conformable and provide low thermal impedance like greases but are designed to overcome the pump-out and dryout issues of grease.
Dispensed Gels in Automotive Electronic Control Unit
(ECU) Application
固美丽导热脂（Thermal Grease）8010
物理特性 颜色 白色
操作温度范围，℃（°F） -55 - +200(-67 - +392)
比重 2.70
导热性能 表观导热系数，W/m-k 3.0
热容，J/g-K 1
热膨胀系数，ppm/K 150
电气性能 体积阻抗， ohm-cm 1014
法规 易燃性等级 V-0
RoHS兼容 是
渗气，%TML 1.33
储存寿命，自装运之日起的储存月数 18
√在炽热部件和散热片或外壳之间采用硅基材料导热
√在电子组件和散热片实际应用中能以多种界面公差进行填充
√可涂布式高配合性材料无需固化过程、混合或冷却
√具有良好的热稳定性，实际上在常规组装按压下无需压力即可变形
√支持需要最低胶层厚度和高导热性材料的高能应用
√是需要返修和野外维修场合的理想选择
